新書推薦：
《
女佣异闻：乙一出道25周年纪念短篇集
》
售價：HK$
59.9
《
生活观察图鉴 中国常见鸟类观察图鉴
》
售價：HK$
179.8
《
父亲身份：探寻血缘之谜
》
售價：HK$
105.6
《
悠游人间 赛博朋克少女插画绘制教程
》
售價：HK$
119.8
《
“李晓鹏说中华史”系列（全二册）
》
售價：HK$
175.2
《
绿色剧变：能源大革命与世界新秩序
》
售價：HK$
82.8
《
你的韧性超乎你的想象
》
售價：HK$
71.8
《
新东方 剑桥雅思官方指南精讲 精确剖析官方指南样题
》
售價：HK$
81.6
|
| 內容簡介： |
|
本书结合具体的控制系统介绍了自动控制的基本理论及工程应用。主要内容包括绪论、控制系统的数学模型、线性系统的时域分析、根轨迹法、线性系统的频域分析、控制系统设计、非线性系统分析、线性离散系统、线性系统的状态空间分析，以及自动控制系统综合案例。本书融入了课程思政内容，从实际应用出发，突出物理概念，减少数学公式推导；强化工程应用中常用知识点的介绍，采用不同方法对一个工程实例进行分析和设计，阐明自动控制原理的应用。
|
| 關於作者： |
|
李彦梅，安庆师范大学机电系教工机械自动化党支部支部书记，教授，硕士生导师，主要从事智能控制与流量检测方面研究，公开发表学术论文20余篇，出版教材3部，主持（参与）省级以上教科研项目4项。
|
| 目錄：
|
第 1 章绪论 ·····································1
1.1 自动控制的基本概念·················1
1.1.1 自动控制的定义·····················1
1.1.2 控制理论的发展过程················1
1.1.3 自动控制系统的组成················2
1.1.4 自动控制系统的基本控制
方式···································4
1.2 自动控制系统的分类·················6
1.3 对自动控制系统的基本要求········7
1.4 控制系统实例···························8
1.4.1 电冰箱制冷控制系统················8
1.4.2 函数记录仪···························9
1.4.3 炉温控制系统·····················.10
本章小结·····································.11
习题···········································.11
第2 章控制系统的数学模型············.13
2.1 微分方程的建立·····················.13
2.2 传递函数······························.14
2.2.1 传递函数的基本概念·············.14
2.2.2 传递函数的性质··················.15
2.2.3 典型环节及其传递函数··········.16
2.3 结构图·································.17
2.3.1 结构图的组成和绘制·············.17
2.3.2 结构图的等效变换················.18
2.4 信号流图······························.23
2.4.1 信号流图的基本概念·············.23
2.4.2 信号流图的绘制··················.24
2.4.3 梅森增益公式及其应用··········.25
本章小结·····································.26
习题···········································.27
第3 章线性系统的时域分析············.29
3.1 典型输入信号·······················.29
3.2 自动控制系统的时域性能
指标····································.31
3.3 一阶系统的时域分析··············.32
3.3.1 一阶系统的数学模型·············.32
3.3.2 一阶系统的单位阶跃响应及
性能分析··························.32
3.3.3 一阶系统的单位斜坡响应及
性能分析··························.33
3.3.4 一阶系统的单位加速度响应及
性能分析··························.33
3.3.5 一阶系统的单位脉冲响应及
性能分析··························.34
3.4 二阶系统的时域分析··············.34
3.4.1 二阶系统的数学模型·············.34
3.4.2 二阶系统的单位阶跃响应·······.35
3.4.3 欠阻尼二阶系统的动态性能
分析·······························.37
3.4.4 二阶系统的单位斜坡响应·······.42
3.4.5 二阶系统性能的改善·············.44
3.5 高阶系统的时域分析··············.46
3.6 稳定性分析···························.48
3.6.1 系统稳定的充分必要条件·······.49
3.6.2 劳斯判据··························.50
3.6.3 相对稳定性·······················.53
3.7 稳态误差······························.54
3.7.1 误差的定义·······················.54
3.7.2 输入引起的稳态误差·············.55
3.7.3 静态误差系数·····················.56
3.7.4 扰动作用下的稳态误差··········.59
3.7.5 改善系统稳态精度的方法········.60
本章小结·····································.62
习题···········································.63
第4 章根轨迹法 ····························.67
4.1 根轨迹的基本概念··················.67
4.1.1 根轨迹·····························.67
4.1.2 根轨迹方程························.68
4.2 根轨迹图的绘制法则··············.70
4.3 参数根轨迹···························.80
4.4 利用根轨迹分析系统性能········.82
4.4.1 已知根轨迹增益确定闭环极点
和传递函数························.82
4.4.2 已知系统性能指标确定闭环
极点································.83
4.4.3 增加开环零点对系统性能的
影响································.84
4.4.4 增加开环极点对系统性能的
影响································.87
本章小结·····································.88
习题···········································.89
第5 章线性系统的频域分析············.92
5.1 频率特性的基本概念··············.92
5.1.1 频率特性的定义··················.92
5.1.2 频率特性的表示方法·············.93
5.2 典型环节及系统频率特性········.94
5.2.1 典型环节的频率特性·············.95
5.2.2 开环系统的频率特性·············103
5.3 频域特性法的稳定性分析········109
5.3.1 奈奎斯特稳定判据················109
5.3.2 稳定裕度··························114
5.3.3 开环对数幅频特性曲线与
系统性能之间的关系·············117
本章小结·····································126
习题···········································127
第6 章控制系统设计······················131
6.1 概述····································131
6.2 PID 控制器··························.131
6.2.1 PID 控制器概述·················.131
6.2.2 比例控制器······················.131
6.2.3 比例微分控制器·················.132
6.2.4 积分控制器······················.133
6.2.5 比例积分控制器·················.133
6.2.6 比例积分微分控制器············.134
6.3 基于频域法的控制系统
设计···································.135
6.3.1 相位超前补偿····················.135
6.3.2 相位滞后补偿····················.137
6.3.3 相位滞后?超前补偿·············.138
6.3.4 串联补偿网络的期望幅频
特性设计方法····················.139
6.3.5 反馈补偿·························.146
本章小结····································.148
习题··········································.148
第7 章非线性系统分析·················.150
7.1 非线性系统概述···················.150
7.1.1 为什么研究非线性系统·········.150
7.1.2 非线性系统的特性··············.150
7.1.3 非线性系统的特点··············.153
7.1.4 非线性系统的分析方法·········.154
7.2 相平面法·····························.155
7.2.1 相平面的基本概念··············.155
7.2.2 相轨迹的绘制····················.156
7.2.3 奇点······························.158
7.2.4 7
|
|
購物車/收銀台(
0
) | 在線留言板
| 付款方式
| 運費計算
| 聯絡我們
| 幫助中心 |
加入書簽
HOME
新書上架
